Toro has been an integral part of the outdoor equipment industry for more than 100 years, and now they are available right here on the Sunshine Coast in our stores!
Toro is arguably the leading brand in outdoor equipment, especially in the field of zero turn mowers, using innovative technology to cater for every mowing, garden, zero turn and outdoor maintenance need.
Sunshine Coast Mowers are an authorised Toro dealer, able to provide outdoor equipment, ride-on mowers and zero turn mowers, perfect for professional contractors, agricultural growers, rental companies, schooling groundsmen, as well as homeowners.
There is a product for every customer in the Toro range, and with Sunshine Coast Mowers now an authorised Toro Dealer, you’ll know you’re getting the right knowledge and advice for the job at hand.
Toro 42" (106.7 cm) Z Master® 8000 Direct Collect Z (74315)
BAG, MULCH OR BOTH
The fill-reduction system lets you switch from 100% bagging to 75% mulching and 25% bagging, so the hopper can be emptied less frequently.
No need to muscle these mowers around. The controls let you maneuver in tight spots almost effortlessly.
The 9.5-bushel hopper means less time emptying and more time mowing. Exclusive baffle design fills evenly back to front for maximum efficiency.
OUT FRONT DECK DESIGN
The out-front deck design allows for more maneuverability and mowing in tighter areas where traditional zero turns can't get to.
TOUGH, DEEP DECKS
Commercial deck is made of welded 7/10 gauge-steel. The deep 4-5/8" design handles taller grass and provides greater vacuum for a clean, refined cut.
TRIM ON BOTH SIDES
The rear discharge deck allows for trimming on either side keeping flower beds and walkways clipping-free.
TORO Z MASTER 3000 52"
EXCLUSIVE TURBO FORCE DECK
High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.
7-GAUGE, HIGH-STRENGTH STEEL
The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.
INDUSTRY'S TOUGHEST SPINDLE ASSEMBLIES
Toro's rugged spindle assemblies survive impacts that would destroy lesser spindles. A stout cast iron housing with a massive base and six mounting bolts absorbs impact loads and distributes them across a broader area of the deck shell. Plus, the solid, one-inch diameter shaft is alloy steel, not the common lower-grade steel used in many competitive models.
A FLAT CRISP CUT WITH PRECISION BLADES
(.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
DELUXE SUSPENSION SEAT
Deluxe suspension seat features thick cushions, large bolsters and 3-D isolator mounts that absorb bumps and vibrations to reduce operator fatigue.
RUBBER DISCHARGE CHUTE
High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
A commercial-grade carrier frame, constructed of 3" x 1.5" tubular steel, supports the cutting deck and stands up to the rigors of professional use.
FOLDING ROLLOVER PROTECTION SYSTEM ROPS
A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.